DYNAMAT XTREME BULK PACK SOUND DEADENING (457MM x 812MM x 1.72MM) 9 SHEET PACK

$399.95 incl. GST

Availability: In stock

SKU: 10455 Categories: , Brand:
Share:

Description

Dynamat Xtreme Bulk Pak
Dynamat Xtreme quiets annoying road noise, improves a speaker’s dynamic range, and makes for a more comfortable driving experience. You can quiet down the noise and get better sound. The Dynamat Xtreme Bulk Pak is the perfect amount of Dynamat Xtreme for any medium to large sized job. With the Bulk Pak you get 9 sheets of 18″ x 32″ Dynamat Xtreme to damp vibrations and get a more solid ride. Use on rear decks, doors, floors, roofs, trunk lids, trunk floors, and wherever noise resonation is an issue and installation will not interfere with the normal operation of the vehicle. Get more bass, more music, lower road noise and better sound.

Thickness: 1.72mm

Kit contains nine 457mm x 812mm pieces of Dynamat Xtreme for rear decks, doors, floors, and trunk floors. Covers an area of 3.3 Square Metre.
Unlike Dynamat Original, Dynamat Xtreme is also recommended for trunk lids, roofs, quarter panels, under-hood installations and multi-purpose use
Dynamat Bulk Pak
Part Number: # 10455
Contents: (9) 18″x 32″ (457mm x 812mm) pieces of Dynamat Xtreme

Dynamat Xtreme: Dynamat Xtreme is a black butyl-based core with 4 mil aluminium constrain layer, and craft paper release liner.

Description: Dynamat is a patented, lightweight elastomeric butyl and aluminium constrained-layer vibration damper. Dynamat conforms and fuses easily to sheet metal and other hard substrates. Material performance is optimized for temperature ranges between 14°F and 140°F (- 10°C to +60°C). Material can withstand temperature extremes between -65°F and +300°F (-54°C to +149°C) and is highly resistant to aging.

Applications: Dynamat can be die cut to shape and placed onto the body surface directly on painted panels or after the sheet metal is cleaned before painting (typically at the sealer application operation). Dynamat is used to treat metal panels, partitions, duct doors, bins, panels and so forth in automobiles, railroad cars, buses, and ships. It is also used for ventilation ducts, relay cabinets, steel furniture, home appliances, sink units, computer equipment, machine tools and many other objects that suffer from vibration-production noise.

Installation: Use scissors, knife or die to cut Dynamat to the desired size and shape before removing the release liner. Next, remove dust, grease, moisture, and other foreign matter from the application surface. Peel off the release liner. The simplest application technique is to bend the mat slightly and attach it along its shortest edge. Press the mat firmly into place, using a Dynamat roller for larger pieces. The roller reduces the risk of leaving air pockets, which reduce Dynamat’s sound damping capacity. Finish by covering all seams and wiring with DynaTape to ensure a professional look and finish. The temperature of the mat and application surface should not be below room temperature during fitting. Heating the material is not necessary.

Shopping Cart
Scroll to Top